CAD/CAM Jeweller for Blender
The manual
Every tool in the add-on, one step at a time. Each page says where to find the tool, what to do, what you should see and what to try if it goes wrong.
Start here
- What CAD/CAM Jeweller isA free Blender add-on for jewellery CAD: rings, stones, settings, ornament, checks and print files, all built on the book's standards.
- What you need to run the add-onBlender 4.2 or newer, and online access only to install, update and use AI Studio. Check your Blender version and its online switch in two steps.
- Install the add-onInstall CAD/CAM Jeweller in Blender from the repository so updates arrive by themselves, or from the zip, then answer the Set Up window and find the tab.
- Your first look at the tabFind the CAD/CAM tab, read the section bar and Start Here, open the J pie and the Jeweller menu, and see which version you have.
- Your first ring in five minutesBuild a band, place a 6.5 mm round stone, set it in four claws, cut the seat, then read the weight and run the checks. Twelve short steps.
- Update the add-onHow Blender offers each new version when you installed from the repository, how to update from a zip, and what an update keeps.
- If something goes wrongFixes for a missing CAD/CAM tab or Jeweller menu, online access, the Set Up window, changed navigation, replaced keys and other common snags.
All chapters
Getting started
Workflows
Setting
Check and print
AI Studio
Reference
CAD/CAM Jeweller is free. Download it, or add its repository in Blender and every update is offered to you.
Download the add-on