A band width
- Input
- Anchor: a credit card, 428 px long, set to 85.60 mm. Line: a band 24 px wide.
- Working
- Scale = 428 / 85.60 = 5 px per mm. Band = 24 / 5.
- Result
- 4.80 mm
The Spec Sheet Generator turns a measured True-Scale render into a print-ready A4 casting brief. Measure the piece, fill in its title, metal, stones and notes, and press Print spec sheet. The sheet carries your image and its measurements in millimetres, a reference, the date, your studio name and an approval line. Print it, or save it as a PDF from your browser's print dialog.
| On the sheet | Where it comes from |
|---|---|
| Title | The Title in Piece details, or the image file name if it is blank |
| Reference | A reference the sheet generates |
| Date | Today's date, in UK format |
| Maker / studio | Your maker or studio name, when you have entered one |
| Image and measurements | The loaded render and the millimetre measurements taken on it |
| Metal, Stones, Notes | The same three fields in Piece details |
| Disclaimer | Dimensions measured with True-Scale; images are design visualisations; confirm all dimensions before production |
| Approval line | Approved by and Date, left blank to sign |
Every measurement on the sheet comes from the anchor you set in True-Scale. The scale is the anchor line's length in pixels divided by its real size in millimetres, and each measurement is its length in pixels divided by that scale, shown to two decimal places.
The sheet needs a loaded image: the tool asks you to load one first if there is none. The reference and the date are written onto the sheet when it is built.
The sheet states that dimensions were measured with True-Scale, that images are design visualisations, and that all dimensions should be confirmed before production.
The Spec Sheet Generator takes its scale from the known size you anchor in True-Scale, and names no outside standard. Its own wording on the sheet is that you confirm all dimensions before production.
This feature is free to use right now, no email needed, as part of True-Scale. The guide below is optional: it walks through the full anchor-measure-verify method, including how to get a clean spec sheet at the other end.
A short note whenever a new free tool lands at hamedarab.academy/tools. Nothing else.